30ft Expandable Folding House Beige with Black Frame

A 30ft double-wing expandable folding house with beige panels and black frames, opening to 56 m2 with two bedrooms.

Product Type: 30ft Expandable Folding House (double-wing expandable container house)

Nominal Size: 30 ft

Expanded Size: L9000 x W6220 x H2480 mm

Folded Size: L9000 x W2200 x H2480 mm

Internal Size: L8540 x W6060 x H2240 mm

Description

The 30ft expandable folding house is a factory-finished prefabricated home that travels as a compact container and opens on site into a full-size room. Two side wings are hinged to the central body on galvanised hinges and swing outward, so about 56 m2 of usable floor space appears without a single brick being laid. Everything inside - insulation, wiring, lighting, sockets, windows, door and floor finish - is installed in the factory and tested before shipping, which means the unit arrives as a complete room rather than a building kit.

The 30 ft layout gives 56 m2 with two bedrooms, a living room, a kitchen and a bathroom for three to six occupants, and this version dresses it in warm beige panels with black window and door frames. The contrast keeps the longer elevation from looking flat, and the beige tone settles well into rural, coastal and park settings. Six double-glazed windows are fitted as standard on this size, so the interior is bright throughout the day.

The structure is a fully galvanised national-standard steel frame. Top and bottom side beams, end beams and secondary beams form a closed box that carries the load of both wings, and 130 mm galvanised hinges take the movement of every fold. The frame is protected by electrostatic powder coating over an anti-corrosion coating, so the steel keeps its finish in coastal, humid and high-sunlight locations.

Technical Specifications

Parameter	Value
Product Type	30ft Expandable Folding House (double-wing expandable container house)
Nominal Size	30 ft
Expanded Size	L9000 x W6220 x H2480 mm
Folded Size	L9000 x W2200 x H2480 mm
Internal Size	L8540 x W6060 x H2240 mm
Floor Area	56 m2
Layout	Two bedrooms; one living room; one kitchen and one bathroom
Occupancy	3-6 persons
Installed Power	12 kW
Total Net Weight	6.0 t
Loading Quantity	1 set per 40ft high cube container
Main Frame	Fully galvanised national-standard steel structure
Top Side Beam	80 x 140 x 3.75 mm galvanised square tube
Bottom Side Beam	80 x 140 x 3.0 mm galvanised square tube
Top End Beam	3.0 mm galvanised bent section
Top Transverse Secondary Beam	30 x 50 x 1.8 mm galvanised square tube
Bottom Longitudinal Secondary Beam	80 x 80 x 2.0 mm galvanised square tube
Bottom Transverse Secondary Beam	40 x 80 x 2.0 mm galvanised square tube
Steel Column	3.0 mm galvanised bent section
Lifting Head	6 mm galvanised lifting head, L210 x W150 x H160 mm
Side Wing Frame	P40 x 80 x 1.8 mm galvanised P-tube and 40 x 80 x 1.8 mm galvanised square tube
Side Wing Bottom Frame	60 x 80 x 2.5 mm galvanised square tube
Folding Hinge	130 mm galvanised hinge
Frame Protection	Electrostatic powder coating plus anti-corrosion coating
External Roof Panel	950 type, 50 mm thick EPS colour steel sandwich panel, 0.3 mm on both faces
Internal Ceiling Panel	950 type, 50 mm thick EPS colour steel sandwich panel
Side Wing Roof Panel	950 type, 65 mm thick EPS colour steel sandwich panel
Wall Panel	950 type, 65 mm thick EPS colour steel sandwich panel on side, front and rear walls
Partition Wall Panel	950 type, 50 mm thick EPS colour steel sandwich panel
Floor	18 mm glass magnesium board, main body and both wings
Window	PVC double-glazed sliding window; 920 x 920 mm; 6 panels
Door	High quality steel fire door; 840 x 2035 mm; 1 set
Electrical System	220 V, 50 Hz
Lighting	300 x 300 mm flat panel light and large ceiling light
Socket	Standard international three-pin and five-pin sockets, socket standard customised on request
Switch	Double and single key switches, switch standard customised on request
Wiring	Incoming 6 mm2, air-conditioning socket 4 mm2, general socket 2.5 mm2, lighting 1.5 mm2; national-standard cable, can be built to the certification of the destination country
Accessories	Corner line; skirting line; edge wrapping; waterproof tape; lifting belt; structural sealant and sealant gun
Exterior Finish	30ft Expandable Folding House Beige with Black Frame
Scope of Supply	Steel frame; roof; wall and partition panels; floor; windows; door; complete electrical installation; lighting; sockets and switches; finishing accessories
Optional Equipment	Bathroom module; kitchen cabinet; air conditioning; wooden or PVC floor finish; extra windows; canopy or terrace; solar package; custom colour and branding
Customisation	Layout, panel thickness, door and window type, socket and switch standard and certification can be adapted to the destination market
Installation	Craned or forklifted into position, wings unfolded and locked, power connected; no foundation required on level ground

Faq

What types of modular houses do you mainly supply?

We specialize in double-wing expandable container houses and folding prefab houses. We support custom sizes, interior layouts and functional configurations for site offices, staff dormitories, emergency shelters and temporary residential projects.

Can the expandable container house be customized?

Yes. We can adjust the layout, doors & windows, insulation material, electrical system, interior decoration and exterior color according to your local climate and project requirements. OEM & ODM services are available.

How long does it take to assemble one expandable house on site?

2-3 skilled workers can finish assembly within a few hours without heavy construction equipment. All main structures are prefabricated in our factory, which greatly saves your on-site labor and time cost.

What is the lead time for mass orders?

Normally the production lead time is 15–30 working days, depending on order quantity and customized requirements. We will confirm the exact schedule after we confirm your project drawings.

What certifications do your modular houses have for export?

Our houses meet standard export requirements. We can provide related documents for customs clearance as requested, such as packing list, commercial invoice and certificate of origin. For special regions, we can discuss other required test reports.

How about the shipping and loading method?

Expandable and folding houses can be loaded into standard shipping containers. Folding design maximizes loading quantity and reduces sea freight cost. We are familiar with export packing and container loading operation.

Do you provide after-sales technical support?

Yes. We supply detailed installation manuals and video guides. Our engineering team offers remote technical guidance to help solve problems during installation and usage.